Many people who decide to go into the tattooing profession are not always prepared by the responsibilities that come with it. It is not simply a profession of expressing art on flesh, or a method of using branding as a fashion trendsetter. Tattoo art entails much more to remember encompassing the big responsibility of keeping health and safety of each equipment at top of the list and maintained at the highest standards. The process is invasive and therefore much care and attention to detail must be focussed upon keeping the customer safe and free from infections (or cross contamination).
All tattoo equipment vary and differ from each other, therefore one must take the time to become familiar with working the machine, but most importantly knowing how to sterilise and maintain the equipment for multiple usages. Being sure that you have the right tools and equipment to perform the procedure is of the utmost important, because something as permanent as tattoo is much more involved requires a very meticulous approach for completion.
The tattoo equipment consists of the machine and its frames that have detachable pieces, each individually connected and taken apart for individual sterilization. The tubes must always be taken off to be sterilized after each usage, which also includes the needles that are in the tubes. Every inch of the tube must be sterilized which means that the hand to which the tattoo artist grips onto must be thoroughly sterilized too; the tubes are very often made from stainless steel or hard plastic.
The tubes do not make contact with the customer's skin, but the ink and blood do make contact that can be autoclaved and can be removed from the machine. They are also available in different sizes because of the needle sizes, so they can be very small or large, with the exception of the tube end that connects to the actual machine making it interchangeable. There are two different types of machines, each with subtle differences.
The first type is a liner which does exactly as it is named. The second being a shader, again living up to its namesake. The liner is built with smaller coils and has an upright position to it, whilst the shader is more angled with bigger coils. The liner is built to only hold liner needles which are a needle bar that allows a small needle or needles to be attached to the end in groups. The liner needle perforates the skin via an up and down motion depositing the ink, and is useful to perform mainly line work and finer details. The shader is as one would guess, used to fill in the larger areas of the skin with colour or shading, which is why it uses a larger coil.
These both need to be sterilized after each use and stored properly in order to prevent any possible spread of infections or diseases. Furthermore, once the tattoo equipment is no longer in use the area in which the artist has been working in must cleaned thoroughly and all equipment must be stored according to the health and safety terms for tattoo artists. All gloves and disposable items should be discarded properly and removed from the vicinity. Getting into a habit of conducting these tasks everyday will help you see it as routine rather than a chore, therefore it is always worth the time spent so as to prevent any unwanted health risks to yourself or to others.
Author Resource:-
Anna Stenning is an expert on correctly maintaining and using tattoo equipment as she has researched tattoo art in the past.
![[Valid RSS feed]](http://www.freebie-articles.com/images/rss.gif "XML Feed For RSS")
Category Rss Feed
Print This Article
Add To Favorites